- Flow Measurement
- Flow Control
- Level Measurement
- Pressure Measurement
- Water Analytical
- Gas Detectors & Gas Analyzers
- I/O Components, Recorders & Automation Components
- Fittings & Valves
Dreshler Resources Sdn Bhd
17B, Jalan Perai Jaya 4,
Bandar Perai Jaya,
13700 Perai,
Penang, Malaysia.
+6019-475 8268
+6019-478 8268
+6019-478 8268
Multiparametric Controller - 50 Series
Previous | 2 / 3 | Next |
Multiparametric Controller Plug & Play - 50 Series
Complete and flexible system for a wide range of applications in water treatment with easy to use software and automatic recognition of sensors: available in two configurations, with up to two (2) and up to four (4) simultaneous measurements, freely selectable. Equipped with two RS485 serial ports: one (1) for sensors with RS485 digital interface and MODBUS RTU protocol and one (1) opto-isolated for the connection with the communication devices (Setup Computer, Remote Control Terminals etc.) of the local networks. Incorporates a Real Time Clock (clock with date) which allows the software to archive the data chronologically to the flash memories also used for storing LOG files of the events.
Programming keypad with 5 bubble-keys with
Internal Data Logger (flash 64 Mbit) with possibility to store up to 250.000 records and to display stored data in tabular and graphic form. Data download to USB PENDRIVE or through RS485 and C_NET dedicated SW. Programmable Analog Outputs for repeating the measurements, PID control and temperature; with the first and the second set on the measurement of the same parameter, the third can be set as the average of the other two.a Digital Output Relays to adjust the Set Points for the measures, the alarm for instrument anomaly, the probe washing or the Set Point for temperature Analog Input for perturbative functions or engineered display of additional measuring Digital Input for disabling of dosage
Complete and flexible system for a wide range of applications in water treatment with easy to use software and automatic recognition of sensors: available in two configurations, with up to two (2) and up to four (4) simultaneous measurements, freely selectable. Equipped with two RS485 serial ports: one (1) for sensors with RS485 digital interface and MODBUS RTU protocol and one (1) opto-isolated for the connection with the communication devices (Setup Computer, Remote Control Terminals etc.) of the local networks. Incorporates a Real Time Clock (clock with date) which allows the software to archive the data chronologically to the flash memories also used for storing LOG files of the events.
User Interface (HMI)
Programming keypad with 5 bubble-keys with
- CAL Key for direct access to the Calibration menu
- GRAPH/USB Key for direct access to the Measure graphs and for data download to USB PENDRIVE
- MODE Key for self-recognition of sensors Graphic TFT color LCD resolution 480x272 visible area 95x93 which allows the simultaneous display of digital measurements
Software & Functions
Internal Data Logger (flash 64 Mbit) with possibility to store up to 250.000 records and to display stored data in tabular and graphic form. Data download to USB PENDRIVE or through RS485 and C_NET dedicated SW. Programmable Analog Outputs for repeating the measurements, PID control and temperature; with the first and the second set on the measurement of the same parameter, the third can be set as the average of the other two.a Digital Output Relays to adjust the Set Points for the measures, the alarm for instrument anomaly, the probe washing or the Set Point for temperature Analog Input for perturbative functions or engineered display of additional measuring Digital Input for disabling of dosage