Greyline Differential Level Transmitter - DLT2.0 Reduce costs and simplify instrumentation at treatment plant headworks. The DLT 2.0 can measure both differential level plus flow through a flume. Install one Sensor on each side of a mechanical barscreen to continuously monitor, transmit, and control level. Use the built-in control relays or 4-20mA outputs to automatically activate the barscreen rake at preset levels. The DLT 2.0 is a simple solution for barscreen level control at wastewater treatment plants, pump stations, and combined sewer systems. It includes two non-contacting ultrasonic sensors to measure level. With sensors positioned above a channel, up and downstream from the barscreen, the DLT 2.0 can display and transmit differential level. The downstream sensor can also be installed above a flume or weir to measure and totalize open channel flow. Three 4-20mA outputs are configured to transmit upstream level, downstream level (or flow), and differential level. Built-in relays can be calibrated for level control, differential level control, or open channel flow. Other DLT 2.0 applications include a two-tank inventory where you can monitor the level in two tanks with one instrument. The DLT 2.0 will alternate display of level in both tanks plus transmit 4-20mA outputs. Use the built-in relays to activate alarms or level controls. This versatile dual-sensor instrument can also be configured as a submergence alarm for Parshall flumes. ___________________________________________________________________________________________________________________________________ TECHNICAL SPECIFICATIONS:   General Specifications Spec name: Description: Electronics Enclosure NEMA4X (IP 66) polycarbonate with clear, shatterproof cover Accuracy ±0.25% of range or 2 mm (0.08 in), whichever is greater. Repeatability and Linearity: ±0.1% Display White, backlit matrix - displays upstream, downstream, and differential level, open channel flow and totalizer, relay states, operating mode, and calibration menu Programming Built-in 5-key calibrator with English, French, or Spanish language selection Power Input 100-240 V AC 50/60 Hz (see Options), 3 W maximum with standard features Outputs 3 x Isolated 4-20mA, upstream and downstream level (or open channel flow), and differential level, 1000 ohm maximum Control Relays 2 total, rated 5 A SPDT; programmable for level control, differential control, or flow proportional pulse Operating Temperature (Electronics) -20 °C to 60 °C (-5 °F to 140 °F ) Approximate shipping weight 6.8 kg (15 lbs) PZ15 Sensor Specifications (Includes 2 PZ15 Sensors) Spec name: Description: Maximum Range 4.57 m (15 ft) with standard PZ15 sensor Deadband (Blanking) Programmable, Minimum 203.2 mm (8 in) Beam angle 8° Operating Frequency 92 KHz Exposed Materials PVC Operating Temperature -40 °C to 65 °C (-40 °F to 150 °F) Temperature Compensation Temperature probe inside the level sensor for high accuracy in changing temperatures Sensor Cable RG62AU coaxial, 7.6 m (25 ft) standard length (see Options) read more

Partial Filled Pipe Electromagnetic Flow Meter TECHNICAL SPECIFICATIONS: Measuring Pipe Size DN200-DN3000 Connection Flange Liner Material Neoprene/Polyurethane Electrode Marerial SS316, TI, TA, HB, HC Structure Type Remote Type Accuracy 2.5% Output Signal Modbus RTU, TTL electrical level Communication RS232/RS485 Flow speed range 0.05-10m/s Protection Class Converter: IP65 Flow Sensor: IP65(standard), IP68(optional) read more

Microflow sensor for magnetic flow meter MS600 ISOMAG The MS 600 ISOMAG microflow sensor has a wide range of applicability thanks to the variety of its attachments. ISOIL Industria offers a wide range of process connections and electrode materials. _________________________________________________________________________________________________ TECHNICAL SPECIFICATIONS: Body material: PP Nominal diameters: from DN 3 to DN 20 Flow rate: 0..12.500 l/h Nominal pressure: PN 16 Liquid temperature: from 0 to + 60 ° C Lining material: PP   read more

Non Contacting Radar Sensors Our Radar technology is complementary to the ultrasonic range from Pulsar. Giving those 'difficult' criteria applications an extra option. Radar is perfect for those kinds of applications where there are changing atmospheric conditions or heavy vapors or fumes. Thanks to Linear Frequency Modulation (LFM) processing, our FMCW Radar technology has a strong signal to noise ratio and excellent resolution, giving it significant advantages over pulsed Radar systems. As with all sensors from Pulsar Measurement, the Radar sensor is retrofittable to all Pulsar Controllers, so whenever your application needs change, your instrumentation can change with you at a minimal cost. _____________________________________________________________________________________________________________________ TECHNICAL SPECIFICATIONS: General Specifications Spec: Description: Dimensions Nominal 130 mm H x 90 mm D (5.11 in H x 3.54 in D) Weight Nominal 1.1 kg (2.4 lbs) Frequency V-band Sensor Body Material Valox 357U Mounting Connection 1 in BSP or NPT Enclosure Protection IP68 / NEMA 6P Operating Temperature (Electronics) -40 °C to +80 °C (-40 °F to +176 °F) Process Pressure -1 bar to +4 bar (-14.5 psi to 58 psi) read more

Non Contacting Ultrasonic Measurement The IMP+ non-contacting ultrasonic sensor is designed to be used wherever you need an accurate and reliable level measurement. Its digital echo processing means the IMP+ is perfect for slurries, liquids, or anywhere you need a display telling you the level or analog output to interface with your site control system or drive a display. There are several measurement ranges available from 0 m to 10 m and each can be wired for 2 or 3-wire operation. All options feature an LCD display and digital temperature measurement and compensation. When combined with Pulsar’s PC Suite, users are able to download, analyze and store echo profiles, set up the IMP’s parameters, install the new firmware to your IMP, and add a flow curve to be able to configure level to flow linearization. _____________________________________________________________________________________________________________________ TECHNICAL SPECIFICATIONS:   General Specifications Spec: Description: Dimensions 186 mm (H) x 133 mm (D) (5.24 in (H) x 7.32 in (D)) Cable Entry:  2 off cable glands 4.5 mm to 10 mm (0.18 in to 0.39 in); Torque to 2 NM Mounting:  IMP3 - 3 m (10 ft) version: 1.5 in BSP/NPT IMP 6 - 6 m (20 ft) version: 1.5 in BSP/NPT IMP10 - 10 m (33 ft) version: 2 in BSP/NPT Suits BSP & NPT, parallel and tapered Weight Nominal 1kg (2.2 lb) Enclosure Protection IP67 Temperature (Process) -4 0°C to +65 °C (-40 °F to +149 °F ) Temperature (Ambient) -40 °C to +80 °C (-40 °F to +176 °F) Input Voltage Range 11-30 V, 3.5-22 mA Accuracy ±0.25% or 6 mm (0.24 in) whichever is greater Resolution ±0.1% or 2 mm (0.08 in) whichever is greater 4-20mA Outputs Resolution 5 μA; both active and passive outputs Temperature Compensation Via internal temperature sensor 0.5 °C (± 32.9 °F) accuracy. Level and volume conversion are installed allowing linearisation for tank shapes. PC Interface All parameters can be accessed and changed through PC Suite software. Echo traces may be viewed on-screen. read more